EQUIPMENT LIST
MARO PRECISION TOOL’S EQUIPMENT IS CONSTANTLY BEING UPGRADED AND IMPROVED.
THE FOLLOWING IS A CURRENT LIST OF OUR FACILITIES AND EQUIPMENT: AS OF Jan, 2005
BUILDING
MODERN ONE-STORY BUILDING WITH APPROXIMATELY
12,500 SQUARE FEET. THE INTERIOR HEIGHT IS 22 FEET;
THE MANUFACTURING AREA IS COVERED BY (5) ELECTRICAL CRANES: CAPACITIES FROM 1/2 TON TO 3 TON
PERSONNEL:
EXECUTIVE & SALES PERSONNEL 2
SUPERVISOR & MANAGEMENT PERSONNEL 2
OFFICE PERSONNEL 3
AVERAGE NUMBER OF PRODUCTIVE EMPLOYEES:
TOOLMAKERS, TOOLROOM MACHINE OPERATORS,
BENCH HANDS, UPGRADERS, ETC. 20
AVERAGE NUMBER OF NON-PRODUCTIVE EMPLOYEES:
TOOL CRIB, TRUCK DRIVERS, MAINTENANCE 3
MACHINERY AND EQUIPMENT
LATEST TYPE; MAINTAINED IN THE PEAK OF CONDITION. OUR MACHINES ARE ALL FULLY EQUIPPED WITH DIGITAL READOUTS, DIVIDING HEADS, VISES, ROTARY TABLES, INDEXING EQUIPMENT, AND OTHER TOOLS AND EQUIPMENT NECESSARY FOR EFFICIENT, ACCURATE OPERATION.
CNC MACHINING CENTER WELL-TOOLED
1 MITSUI SEIKI VERTICAL MACHINING CENTER MODEL VR5A EQUIPPED WITH THE LATEST ADVANCES IN PRECISION ACCURACY AND MILLING CAPABILITIES.
* MAXIMUM WORK ENVELOPE AND AXIS TRAVELS OF: 42.5 x 24.5 x 24.5
* INDUCTOSYN FEED BACK SYSTEM SCALES
* POSITIONING ACCURACY OF +- .00012”
* REPEATING ACCURACY OF +- .00006”
* 20 H.P. SPINDLE MOTOR
* RAPID TRAVERSE OF 472 IN./MIN.
* TOOL SHANK - CAT 50
* MACHINE WEIGHT OF 21,000 LB. NUMERICAL CONTROL UNIT FANUC-11MA
* SPINDLE COOLING DEVICE
* AUTOMATIC CHIP CONVEYOR
* CAD CAM PROGRAMMED
COMPUTER EQUIPMENT: (5) 1800mhz. OR FASTER PENTIUM CLASS COMPUTER STATIONS, W/ INTERNET CONNECTION. E-MAIL (maro@marotool.com), AutoCAD 2000, DXF and IGIS files, inquire for any other formats
CAD/CAM SYSTEM
1 TEKSOFT PROCAD/CAM SYSTEM (2000 VERSION)
INSTALLED ON A 1800 MHz PENTIUM COMPUTER. INTEGRATED POST PROCESSOR FOR OUR FANUC 11MA CONTROL. LATEST TECHNOLOGY SOFTWARE ALLOWS PROGRAMMING OF SOPHISTICATED PARTS IN BOTH SHORT AND LONG RUN PRODUCTION. .
BORING MILLS 4 WELL TOOLED
1 DEVLIEG 3H-48 x 36 EQUIPPED WITH 30” x 40” INDEX TABLE AND .0001” AUTOMATIC POSITIONING “COMMANDO” READOUT SYSTEM (1969)
2 DEVLIEG 3H-72 x 48 EQUIPPED WITH INDEX TABLES, “COMMANDO” SYSTEM
1 DEVLIEG 4H-72 x 60 EQUIPPED WITH INDEX TABLE, “COMMANDO” SYSTEM (1975)
JIG BORING MACHINES 2
1 PRATT & WHITNEY 2A DIGITAL READOUT, ROTARY TABLES, ETC (1959)
1 PRATT & WHITNEY 3B SONY DIGITAL READOUTS, ELECTRONIC PROBE PICK-UP, ROTARY TABLES, ETC (1961)
LATHES
2 WELL-TOOLED, WITH DIGITAL READOUTS, TAILSTOCKS & STEADYRESTS
1 HARRISON ALPHA 550 ELECTRONIC HEAVY DUTY LATHE CNC CONTROLLED (1997)
14.5” DIA. SWING OVER BED,
32.65 DIA. SWING OVER GAP X 80” LONG
CAD/CAM PROGRAMMABLE
1 YAM 1250G Tool Room Lathe
9.75” DIA. SWING OVER BED,
25.575 SWING OVER GAP X 48” LONG
MILLING MACHINES (12) MODERN, WELL-TOOLED, HEAVY DUTY
2 ACER E-MILL W/ 3 AXIS ACCU-RITE CONTROL (1999)
1 SAN TEC CNC MILL 2 AXIS PROTO TRAK MX2 CONTROL (1993)
2 ALLIENT MILLING MACHINES WITH PROTO TRAK MX2 CONTROLS (1998)
3 BRIDGEPORT MILLING MACHINE W/ (PROTO TRAK) CONTROL (1990)
2 POLOMCO HEAVY DUTY KNEE MILL W/ 4 AXIS READOUTS (1979)
1 KEARNEY & TRECKER HEAVY DUTY #3 VERTICAL MILL (1962)
1 UNIVERSAL MILL WITH 3 AXIS DIGITAL READOUTS (1979)
SURFACE GRINDERS (3) HIGH PRECISION IN EXCELLENT COND.
1 MATTISON 14 x 72 x 20 SURFACE GRINDER (1971)
1 MITSUI 6 x 12 PRECISION SURFACE GRINDER (1978)
1 MITSUI 6 x 18 PRECISION SURFACE GRINDER (1979)
ID GRINDERS (2) WELL EQUIPPED, MODERN
1 PARKER-MAJESTIC 12 x 30 GRINDER (1969)
1 HEALD 72A TOOL ROOM GRINDER 22 SWING x 36 CROSS SLIDE HEAD (1954)
UNIVERSAL OD GRINDERS (2) WELL EQUIPPED, MODERN
1 CINCINNATI UNIVERSAL TOOL ROOM GRINDER 15 x 60 (1951)
1 CINCINNATI UNIVERSAL TOOL ROOM GRINDER 12 x 36 (1976)
DRILL PRESS (3) SAWS (2) VERTICAL AND HORIZONTAL
1 HEAVY DUTY RADIAL ARM DRILL PRESS WITH 5 FT. ARM
AND #5 MORSE TAPER (1951)
2 JOHANSON GEAR HEAD DRILL PRESSES #4 MORSE TAPER (1971)
HONE (1)
1 SUNNEN HONE FULLY EQUIPPED FOR PRECISION HONING (1977)
BENCH AND ASSEMBLY DEPARTMENT
THIS AREA OF OUR PLANT IS USED BY OUR EXPERIENCED AND QUALIFIED TOOLMAKERS TO PERFORM BENCH, INSPECTION, AND ASSEMBLY OPERATIONS NECESSARY IN THE MANUFACTURE OF PRECISION TOOLS, GAGES, FIXTURES, AND SPECIAL MACHINE COMPONENTS.
INSPECTION DEPARTMENT AND QUALITY ASSURANCE
MARO’S TEMPERATURE-CONTROLLED INSPECTION ROOM HAS BEEN COMPLETELY EQUIPPED WITH STATE-OF-THE-ART MEASURING INSTRUMENTS. OPERATED BY TRAINED PERSONNEL. INSPECTION REPORTS ARE AVAILABLE UPON REQUEST.
1 CMM BROWN & SHARP X-CEL MODEL 7-10-7 ( UPGRADED ‘99)
* MEASURING RANGE 25 x 40 x 25
* VOLUMETRIC ACCURACY .0003”
* REPEATING ACCURACY .00014 & COMPUTER GENERATED INSPECTION REPORTS OPERATED USING B & S MICROMEASURE III SOFTWARE
2 BROWN & SHARP ELECTRONIC HEIGHT GAGE (1991 & 1996)
* 2 DIMENSIONAL ANALYSIS FEATURE
* 32.5” MEASURING CAPACITY
* ACCURACY -+.00015”
SUBCONTRACT SERVICES
* HEAT TREATMENT OF STEEL AND OTHER MATERIALS
* STEEL FABRICATION, & WELDMENTS
* EDM, & SLOTTING
* PATTERN MAKERS
* CASTINGS (FERROUS AND NON-FERROUS)
* GEAR CUTTING AND GRINDING
* SPLINE MILLING AND GRINDING
* THREAD GRINDING (INTERNAL AND EXTERNAL)
* JIG GRINDING
* HARD CHROME, BLACK OXIDE, AND PROTECTIVE COAT PLATING
* ALSO OTHER SPECIALIZED TOOL MAKING FUNCTIONS
1/21/05
|
